Towing questions, answered straight

Titan Tow & Repair prices heavy-duty towing per job, not off a flat menu, because it depends on the truck that has to be sent, how far it runs, whether the unit is loaded and whether recovery work is needed. Call (816) 888-8732 and we will quote your job before we roll.

Usually yes, on both counts. Our heavy wreckers move loaded semi trailers without the tractor and without unloading the freight, provided the trailer can be made safe to travel: brakes released, lights working, tires and wheel ends sound and the landing gear fully up. If the load has shifted or the trailer is damaged, we will tell you on scene whether it has to be transferred first.

Yes. We handle winch-outs, uprighting, jackknifed tractors and load-shift recovery with WreckMaster-certified operators and rated rigging. Recovery is a separate skill from towing and we staff it that way — a tow is about moving a unit that is already sitting right, and a recovery is about getting it there without adding damage. The two things that decide the plan are how the unit is lying and whether it is loaded, so tell us both when you call, and send a photo if it is safe to take one.

In everyday use, yes — a wrecker is the truck, and "wrecker service" is what people in this part of Missouri usually call towing. The distinction that actually matters is not the word but the class of truck. A light-duty wrecker or a flatbed handles cars and pickups; a semi tractor, a loaded trailer or a bus needs a heavy wrecker with the boom rating and the rigging to lift it. We run both, so you do not need to know which one you want before you call — describe the vehicle and where it is sitting, and we will send the truck that can actually move it.

Heavy-duty towing is towing for the heaviest road vehicles: semi tractors, tractor-trailers, loaded trailers, buses and coaches, dump trucks and equipment. They are beyond what a rollback flatbed can carry, so Titan Tow & Repair moves them with a heavy wrecker and rigging made for that weight. Box trucks, straight trucks and fleet vehicles are medium duty, and cars, pickups, vans and smaller RVs are light duty and ride a flatbed.

A heavy wrecker is a heavy-duty tow truck built around a boom at the rear that raises and extends, a set of winches, and an underlift that goes under a truck's front axle or frame to lift one end and tow it. It is the truck for semi tractors, loaded trailers, buses and equipment, including units that are stuck, jackknifed or rolled over. Titan Tow & Repair runs a heavy wrecker and a second heavy-duty tow unit from its yard in Liberty.

Usually within about 60 minutes for most of the metro, with a real ETA for your exact location on the phone rather than a guess. The wrecker leaves the Titan Tow & Repair yard in Liberty, and traffic, weather and exactly where you are sitting decide the real number.

Yes — 24-hour heavy-duty towing on the Kansas City interstates is most of what Titan Tow & Repair does. The yard sits in Liberty minutes from I-35, and we run the metro loop and the freight corridors that cross it around the clock: I-35, I-70, I-435, I-635, I-29 and US-71, every day including holidays. A person answers the phone at any hour, not a service taking messages, and dispatch starts while you are still describing the truck. Tell us the highway and mile marker first — on an interstate call that is the detail that matters most.

Yes. The state line runs through the middle of this metro and freight does not stop at it, so neither do we — Kansas City, Kansas and the Kansas side are inside our service area the same as the Missouri side, west on I-70 through Lawrence to Topeka and north through Leavenworth to Atchison. That takes in the interstates that cross over: I-70, I-435 and I-635. Tell us the highway and which side of the line you are sitting on when you call, because on a metro job that decides the approach more than the mileage does.

Yes. Hot shots sit in an awkward gap — heavier and longer than a pickup, lighter than a class 8 tractor — and plenty of companies are set up for one end or the other but not the middle. We run both ends out of one yard, so a dually with a gooseneck or a flatbed rig gets the truck that actually suits it rather than whatever happens to be free. Tell us the trailer length and whether it is loaded; on a hot shot those two answers usually decide which unit comes out.

Yes. Buses and coaches are heavy-wrecker work and we handle them the same way as tractors — school buses, transit and motorcoaches included. It is one phone number whatever the vehicle, and telling us the length and rough weight is what lets us send the right truck the first time.

Yes — they are two names for the same service. A mobile diesel mechanic is a technician who drives to the truck with the diagnostic gear, the tools and the common parts, instead of the truck being towed to a shop. That is exactly what our service truck is: it works on diesel tractors and the trailers behind them where they are standing, 24 hours a day, across Kansas City, northwest Missouri and northeast Kansas. It handles air and brake faults, batteries and charging, cooling, DEF and sensor problems, fault-code diagnostics and trailer repairs. Engine internals, transmissions and anything that needs a lift are shop work, and we will say so on the phone.

Air leaks, brake chamber and slack adjuster work, batteries, starters, alternators, hoses and belts, coolant leaks, lights, landing gear, air lines and most trailer electrical faults. Engine internals, transmissions and anything needing a lift have to go to a shop.

Yes. Trailer lights, wiring, landing gear, doors, air lines and brake work are a large share of what the service truck does, on dry vans, reefers and flatbeds. Trailer faults are worth calling about early: most of them stop a unit being legal to move rather than able to move, and a lighting or brake fault will hold a load at a scale or a gate. Tell us the trailer type and what has failed and we will bring the parts we are likely to need.

Usually, yes. A roadside fix means no tow bill, no shop intake queue and a driver who is moving again the same day rather than sitting on hours he cannot get back. The exception is a fault that needs the vehicle lifted, a part we would have to order, or more time at the roadside than the location is safe for. We will tell you honestly on the phone which way is likely to be cheaper once we know what the truck is doing.

Yes — the service truck is a diesel mechanic that drives to you rather than one you drive to, because most of what strands a truck is roadside work rather than shop work. Air and brake faults, batteries, starters and alternators, cooling and overheating, DEF and sensor problems, and the derates and regen faults that put a modern truck into limp mode are all things we handle where the unit is standing. What we will not do is pretend: an engine that needs to come apart, or a fault that needs a part nobody carries on a service body, is a shop job, and we will tell you that on the phone rather than after two hours on the shoulder. Tell us the dash codes if you have them — on a modern truck that usually decides the answer before we set off.

Yes. Titan Tow & Repair's service truck runs the same 24/7 dispatch as its wreckers, covering the Kansas City metro, northwest Missouri and northeast Kansas from St. Joseph and Cameron to Topeka — nights, weekends and holidays included. Most air, electrical, battery, cooling and trailer faults are fixed where the truck sits, which is usually faster than a tow into a shop queue even before the shop opens. Call, describe what the truck is doing, and you will get an honest answer about whether it is a roadside fix and how far out the truck is.

Yes. For a semi, roadside assistance means a truck that comes to you and fixes the fault where the rig stopped, and that is what Titan Tow & Repair's service truck does 24 hours a day across Kansas City, northwest Missouri and northeast Kansas: air and brake faults, batteries, starters and alternators, cooling, DEF and sensor problems, trailer faults and tire replacement. If it cannot be fixed safely at the roadside, the wrecker is ours and on the same phone number. You do not need a membership or a motor-club plan to call: we take cash, the major cards and insurance billing, and a fleet can set up an account so a dispatch is one call with a unit number. Call (816) 888-8732.

Titan Tow & Repair prices semi truck road service per job: you pay for the call-out, the time on scene and the parts, quoted when you call and describe the fault, not revealed afterward. What usually makes mobile repair the cheaper path is everything it removes: no tow bill, no shop intake queue, no driver sitting for a day waiting on a bay. The honest exception is a fault that needs the truck lifted or a part nobody carries on a service body, and Titan will say on the phone when a shop is genuinely the cheaper answer.

Yes. The service truck runs the same 24/7 schedule as the wreckers, including nights, weekends and holidays, and a person answers the phone rather than an answering service taking a message. Night calls are worth making early rather than waiting until morning: an air or lighting fault fixed at 2am puts the load back on the road before the day starts, and the roads are emptier, which usually makes the repair itself quicker and safer than the same job in traffic.

Yes, and lighting faults are ones we fix at the trailer. A lighting fault is the classic example of a trailer that drives perfectly and still cannot legally leave — an inspector will hold it, and the load sits until the lamp works. We carry markers, tails, brake and turn lamps, harness repair parts and seven-way plugs on the service truck, and most of these faults turn out to be a corroded ground or a chafed harness rather than the lamp itself. Tell us which lamps are dead and whether they died together, because that on its own usually tells us where the fault is before we set off.

We repair the trailer — lights, wiring, brakes, air lines, landing gear, doors and tires — on a reefer the same as on a dry van. What we do not do is repair the refrigeration unit itself: that is specialist work on a sealed system, and a reefer plant that has stopped holding temperature needs the manufacturer's service network rather than a roadside truck. Call us for the trailer and we will be straight with you about which of the two you actually have, because a reefer that will not cool and a reefer that will not roll are different problems with different answers.

Yes — dropped trailers at docks, drop yards and distribution centers are a large share of trailer work, and the tractor does not need to be there. Tell us the gate procedure, who to call on arrival and the unit number so we work on the right trailer; a yard with forty trailers in it is exactly where the wrong one gets fixed. If the yard has restricted hours, say so when you call — that changes when we can be there, not whether.

Yes — roll-up and swing doors, hinges, latches, seals and damaged rear frames are on the standard list. Door faults sit in the same category as lighting: the trailer drives fine and still cannot work, because a door that will not shut or seal is a load that cannot be secured or a reefer that cannot hold temperature. Describe what the door is doing and whether the trailer is loaded, and we will say honestly whether it is a roadside repair or bodywork for a shop.

Almost always because air is not reaching the trailer's spring brakes, which are applied by springs and held off by air. Check that the system has built full pressure, that the red trailer air supply knob stays in and that the glad hands are not crossed or leaking. If all of that is right and the brakes still hold, a leaking chamber, a failed relay valve or ice in the lines is the likely cause. Titan Tow & Repair finds and fixes the fault where the trailer is standing, 24 hours a day.

Yes. The same mobile service truck works on the tractor and the trailer on one call: air systems and brakes, batteries and charging, cooling and diagnostics on the truck, and lights, wiring, landing gear, air lines, brakes and doors on the trailer. Tell dispatch on (816) 888-8732 everything that is wrong with both units, so the right parts are on the truck before it leaves.

No. A dropped trailer at a dock, in a yard or on a lot is a job we do without the tractor, and there is no need for a driver to sit with it while we work. Tell us where it is, how we get through the gate and who to call when we arrive, and give us a way to confirm the unit number so we work on the right trailer — a yard with forty trailers in it is exactly where the wrong one gets fixed. If the trailer is somewhere with restricted hours, say so when you call, because that changes when we can realistically be there rather than whether we can.

Yes. Call (816) 888-8732 and ask for an account. We take your billing contact and vehicle list once, and after that dispatching a truck is a single phone call with the unit number — no card at the roadside and no driver trying to authorize a job he has no authority to authorize. Invoices carry the vehicle, driver, location, time and destination, which is normally what an office needs to reconcile the charge against a run.

Yes, and most fleets prefer it. Tell us the destination when you call and the vehicle goes straight there rather than through our yard, which is both faster and cheaper than a two-stage move. Our Liberty yard is available if you need somewhere to hold a unit — overnight, over a weekend, or until a decision gets made about it — and it can be collected from there at any hour.

Often, yes — we run wreckers, flatbeds and a service truck from one yard, so two units down in the metro is a normal day rather than a crisis. What we will not do is promise unlimited capacity: if a storm has half the metro calling at once, we tell you where you are in the queue instead of telling everyone they are first. For fleets that is usually the more useful answer — dispatch can plan around an honest hour, not around a promise that slips.

Yes — Titan Tow & Repair's fleet invoices are built for DOT and insurance files. Every fleet invoice carries the unit, driver, location, time, destination and the nature of the work — the fields a claims adjuster or a safety department actually needs to close a file, and the reason offices stop chasing us for reconstructed receipts. If your carrier or insurer needs a specific format or reference on the paperwork, tell us at account setup and it goes on every invoice automatically after that.

Yes, where the carrier and policy allow it — Titan Tow & Repair accepts insurance billing, so tell us who the insurer is when you call and we will confirm rather than guess. We work with insurers and provide the documentation claims departments ask for: vehicle, driver, location, time, destination and the nature of the work. Where a carrier will not bill direct, we invoice you and give you paperwork in the form the claim needs, which usually settles faster than a reconstructed receipt.

It is quoted per job rather than from a flat price list, because a box truck can need either of two different trucks. A lighter box van or cutaway may ride a rollback flatbed; a full-size straight truck, especially a loaded one, generally goes behind a wrecker, with the driveline protected and any air brakes released before it moves. How far it is going, and whether it has to be winched out first, change the price too. Call (816) 888-8732 with the GVWR from the door label, the body length and the load, and you get a price and an ETA before the truck rolls.

A winch-out is pulling a vehicle that is stuck but otherwise fine back onto ground it can drive on, using a tow truck's winch. The truck is anchored on firm footing, and it is the job for mud, snow, a soft shoulder, a median or a shallow ditch. Nothing is lifted and nothing is towed away: once the vehicle is back on a surface that will carry it, it usually drives off under its own power. When the vehicle is on its side, badly angled, damaged or loaded in a way that makes a straight pull unsafe, the job stops being a winch-out and becomes a recovery, which takes more equipment and more planning.

Towing moves a vehicle that is already sitting on its wheels on the pavement. Recovery is the work of getting it there first: winching it out of a ditch, uprighting it after a rollover, or separating a jackknifed unit or dealing with a shifted load without adding damage. Titan Tow & Repair plans and rigs a recovery before anything is pulled, and it very often ends in a tow.

Both. Cars, pickups and vans that have slid off into mud, snow or a ditch get pulled out with the same care and the appropriate equipment — a rated line on proper attachment points, not a chain around whatever looks solid. The physics are gentler than a loaded semi but the mistakes are the same: pulling from the wrong point or the wrong angle bends things. Tell us what the vehicle is, how far off it went and what it is sitting in, and the right truck comes out.

Yes. A truck stuck in mud but otherwise upright and undamaged is a winch-out: the tow truck anchors on firm ground and pulls it back onto a surface that will carry it, day or night. Stop spinning the drive wheels while you wait, because every turn digs the truck deeper and can turn a short pull into a recovery. When you call (816) 888-8732, say whether it is loaded, how far it has sunk and how far it is from pavement. A unit sunk to the frame or leaning over needs more rigging, and we plan that before anything is pulled.

The pull itself is usually the short part — most of the time on scene goes into assessing and rigging, because the pull only goes well if the setup did. A straightforward slide-off can be back on the pavement quickly; a loaded unit deep in soft ground takes as long as doing it without damage takes. We give you an honest window on the phone once we know how deep, what surface and whether it is loaded, and we would rather quote the realistic version than the flattering one.

Titan Tow & Repair quotes winch-outs and recoveries per job, not off a rate card. The price follows the assessment and rigging time, the equipment that has to come, how many operators it takes, the ground, and any traffic control the responding agency requires. A shallow slide-off on firm ground is a short job; a unit sunk to the frame or folded becomes a recovery with rigging time, a second unit and often a tow afterward. Tell us how it is lying and you get the price before we roll.

WreckMaster is the recovery industry’s training and certification program for rigging, load handling and recovery planning. It matters because a recovery is a calculation before it is a pull: the anchor, the angle and the sequence decide whether the unit comes out intact. An unrated pull on the wrong angle can fold a trailer, shift or ruin a load, part a line under tension, or injure the people standing on the shoulder watching it. Certification is the reason we plan a job before anything is hooked.

Yes. We work alongside law enforcement, fire and DOT on highway scenes and follow their direction on lane closures, clearance times and the order things get moved in. On a live scene the agency in charge sets the priorities and we work to them: casualties and traffic flow come before the vehicle, and a recovery sometimes waits for an investigation to finish. If you are a driver at a scene like that, tell us which agency is on it and who is directing the clearance.

We carry tires. The reason we ask for the size and position on the phone is so the right one is on the truck when it leaves rather than after a second trip — the common sizes cover most calls, and an unusual size is worth knowing about before we set off instead of when we arrive. Read the sidewall if you can do it safely from the right side of the vehicle, and tell us which axle and whether it is an inside or outside dual. That one detail is the difference between a single road call and two.

Sometimes, and we will tell you honestly which one you have. A clean puncture in the tread area of a sound casing is often repairable. What is not repairable is a sidewall injury, a casing that has been run flat and heat-damaged, or a blowout that has already shredded — and a repair on any of those is a failure waiting for the next load. Steer positions get the most conservative call of all, because a steer failure at speed is the one that does not end with a phone call.

Titan Tow & Repair prices a roadside truck tire call like the rest of its mobile repair work: per job, quoted when you call and describe it, not from a flat price list. To get an accurate quote, tell us the tire's size off the sidewall, its position (steer, drive or trailer, inside or outside dual) and any wheel-end damage the failure left, such as studs, nuts and hardware. A clean puncture in the tread of a sound casing is often repairable; a sidewall injury or a casing that has been run flat is replaced. With those details the right tire comes on the first trip.

Yes. Titan Tow & Repair runs roadside tire service for semis, box trucks and other commercial trucks 24 hours a day, including nights, weekends and holidays, with the tires carried on the service truck. Get the truck as far onto the shoulder as it will safely go, then call (816) 888-8732 with the tire size off the sidewall, its position (steer, drive or trailer, inside or outside dual) and where you are. For a car or pickup with a flat, the same number gets a tire change.

Usually within about 60 minutes for most of the metro, with a real ETA for your exact location on the phone rather than an optimistic one. What speeds it up is knowing the position and size before we roll. What slows it down is a live-lane situation needing traffic management first — tell us where you are sitting relative to the white line, because on a shoulder call that decides how we approach as much as how fast.

Yes, cars as well as trucks. We run rollback flatbeds for cars, pickups, vans and smaller RVs out of the same Liberty yard as the heavy wreckers, 24 hours a day. Being a heavy-duty company does not mean we turn down a car — it means the same dispatch that can send a wrecker to a semi can send a flatbed to a sedan, and one phone call covers either. Tell us what you drive and whether it still rolls and steers, because those two answers decide which truck comes.

On a flatbed the vehicle rides on the deck with no wheels turning and no drivetrain spinning, which is the safe option for all-wheel drive and four-wheel drive, lowered cars, non-rollers, and anything with damaged suspension or steering. A wheel lift leaves two wheels on the road, and on the wrong vehicle that means transmission or differential damage that costs more than the tow did. If you are not sure which yours needs, tell us the make, model and drivetrain and we will decide before the truck leaves.

Usually yes, but the clearance decides it, so tell us the height when you call. A rollback needs room to tilt the deck and space to winch the car straight, which many parking structures do not have — in those a wheel lift goes in instead and brings the vehicle out to where it can be loaded properly. Underground levels, tight ramps and low beams are all worth mentioning up front. We would far rather know before the truck is dispatched than send one that cannot get in.

Light-duty tows are quoted on the phone when you call — the honest inputs are the distance, whether the car rolls and steers, and whether it is somewhere awkward like a parking structure. We do not publish a rate card because the same tow can be simple or fiddly, but we will give you the number before the truck rolls, and we will tell you on the phone what would change it. Nights and weekends are normal working hours for us.

Yes — that is what the winch on the flatbed is for. A car with a seized engine, locked wheels, collision damage or no key gets winched up the deck on skates or dollies where the wheels will not turn, and rides flat with nothing touching the road. Tell us what is wrong with it and where it sits; a dead car in a driveway is routine, and a dead car in an underground garage just needs the clearance conversation first.

Yes, where we can — jump starts, lockouts and tire changes are part of the light-duty side of the operation, on the same 24-hour dispatch as everything else. The honest caveat is in that "where we can": some late-model cars protect their locks beyond what roadside entry tools sensibly attempt, and a wheel seized to the hub can turn a tire change into something else. Tell us the make, model and what happened, and we will say on the phone whether it is a five-minute roadside job or whether the flatbed should come along in case. Either way you are not calling a second company.

Yes. You do not need AAA, a membership or a motor-club plan to call Titan Tow & Repair. Jump starts, lockouts and tire changes for cars, where we can, are part of the light-duty side on the same 24-hour dispatch as the flatbeds, and we take cash, the major cards and insurance billing. Tell us the make, model and what happened, and we will say on the phone whether it is a roadside job or the flatbed should come along.

It is quoted per job, because an RV tow can be anything from a camper van on a flatbed to a forty-foot coach on the heavy wrecker, and those are different trucks. The inputs that set the price are the class and weight of the coach, how far it is going, where it is sitting, and whether the driveline has to be disconnected or the coach winched out first. Call (816) 888-8732 with those details and you get the number before the truck rolls.

Yes, when it is towed the way the chassis maker intends. A diesel pusher has its engine and drive axle at the back, so the drive wheels either come off the ground or the driveshaft is disconnected before the coach moves — rolling on a live driveline can wreck a transmission that is not being lubricated. Most pushers also run air brakes, which have to be dealt with before the wheels will turn freely. This is the same heavy-wrecker work we do on buses and tractors, done by WreckMaster-certified operators rather than improvised.

Get everyone out and away from traffic first; nobody rides inside a motorhome or trailer while it is being towed. Then, if it is safe to do so, bring the slide-outs in, raise the levelling jacks, stow the awning and any roof antenna, turn the propane off at the tank, and latch the cabinets and the fridge. At a campsite, unplug shore power and disconnect water and sewer. If a slide or jack will not retract, tell us when you call — it changes how the coach gets loaded.

That depends entirely on the plan, so ask it three things: whether it sends its own provider or reimburses you, the heaviest and longest coach it covers, and how far it will pay for. RV plans are usually written differently from ordinary car motor clubs, and a Class A can fall outside a plan built around cars. If you call us directly, we take cash, the major cards and insurance billing, and you get an invoice you can submit for reimbursement.

Yes, size depending. A smaller travel trailer or camper can ride a rollback flatbed; a long fifth-wheel is a bigger conversation, so tell us the length, the number of axles and whether it is still hitched to the truck that was pulling it. If that truck is the thing that broke down, say so — sometimes the pickup and the trailer are one call, sometimes they need two trucks, and we would rather sort that out on the phone than at the shoulder.

Yes. A motorhome is heavy for its tire footprint, so wet grass, a soft gravel pad or the edge of a lakeside site can swallow the drive wheels quickly. Stop spinning them as soon as the coach stops moving, because every extra turn digs it deeper and can put the frame on the ground. Tell us what the ground is, how much room there is to work, and whether there are low branches overhead. A controlled winch-out from firm footing brings it back without dragging the coach sideways.